The Gloves Non Power Needle Detector With Alarm Lights is an innovative inspection solution designed for glove manufacturers requiring reliable metal contamination detection with enhanced visual alerts – all without continuous power operation. This hybrid system combines a primary passive magnetic induction array with a battery-powered multi-point LED alarm system to detect ferrous contaminants as small as 0.6mm in diameter in various glove materials .
Featuring a compact 450mm × 350mm inspection surface optimized for glove inspection, this detector addresses the specific challenges of identifying metal fragments in finger seams, cuffs, and reinforced areas where needle breakage is most common. The non-powered core system uses strategically arranged high-strength neodymium magnets to create a uniform magnetic field, while the auxiliary alarm module – powered by AA batteries (providing 6 months of operation) – activates a 12-point LED indicator array for precise contaminant location .
Constructed with a lightweight aluminum frame and scratch-resistant acrylic inspection plate, the detector protects delicate glove materials while maintaining portability at just 14kg. The IP65-rated alarm module is dust and water-resistant, making it suitable for the humid environments common in glove manufacturing facilities. It meets international safety standards for personal protective equipment, helping manufacturers comply with global export requirements .
Primary non-powered magnetic induction for core detection capability, augmented by a battery-powered alarm module with 12-point LED indicators showing contaminant location to within 3cm .
Optimized magnet array achieves 0.6mm diameter ferrous particle detection – 30% higher sensitivity than standard non-powered detectors, critical for tiny needle fragments in glove seams .
Battery-powered LED indicators with 6-month continuous operation on standard AA batteries, with low-power alert and automatic standby mode after 30 minutes of inactivity .
Contoured 450mm × 350mm inspection surface with enhanced magnetic density in finger zones, ensuring complete coverage of glove shapes without detection gaps .
Lightweight 14kg design with integrated carry handles and non-slip rubber feet, combining portability with stable operation across different workstations.
Critical for ensuring surgical and examination gloves are free from metal contaminants that could compromise sterility or patient safety.
Ideal for quality control in work gloves, tactical gloves, and industrial gloves where needle fragments could cause injury during use.
Ensures leather, knit, and decorative gloves meet safety standards for consumer products, detecting contaminants from sewing and embellishment processes.
Perfect for verifying safety after glove repairs or modifications where needles may break during stitching.
The primary detection uses neodymium magnets to create a magnetic field that identifies ferrous contaminants. When a contaminant is detected, it triggers the battery-powered alarm module, activating the corresponding LED indicator to show the precise location .
Gloves have thin material sections and tight seams where tiny needle fragments can embed. The 0.6mm detection capability ensures even microscopic contaminants that could penetrate glove materials are identified before use .
The LED alarm module operates for 6 months of continuous use on four AA batteries under normal operating conditions. It includes a low-battery indicator light and enters power-saving mode after 30 minutes of inactivity to extend life.
No, the inspection surface features a scratch-resistant acrylic plate with polished edges specifically designed to prevent snags, tears, or marking on delicate materials including latex, leather, and coated fabrics.