A waffle manufacturer approached us with a request to integrate a weighing machine into their production line. Their waffles are produced as whole sheets, measuring approximately 360 mm in length, 500 mm in width, and 20 mm in height. To accommodate these dimensions, we custom-designed the weighing section to ensure accurate and efficient weighing before the waffles are cut into individual portions.

A food bag manufacturer approached us with a request for a checkweigher to be installed after their packaging machine. The goal was to detect whether the product weight met the required standards, thereby identifying underweight or overweight packages. Generally, integrating a weighing machine into a production line yields better results compared to manual feeding. This is because, in dynamic weighing, factors such as the position of the product on the conveyor belt and the uniformity of its weight can significantly affect accuracy. In a production line, the position of each product is nearly identical, whereas manual feeding can introduce variability.

A corn flakes manufacturer approached us with a specific need for a metal detection system in their production line. Their process involves using a multi-head weigher to portion out roughly equal amounts of corn flakes, which then pass through a metal separator to ensure no metal contaminants are present before packaging. They require a reliable metal separation solution to integrated into their existing workflow.

A factory specializing in plastic recycling approached us with a request to install a metal detector on their bottle cleaning line. The product to be detected is PET flakes in bulk form, and the metal detector needed to be installed on an overhead floor rather than on the ground. To facilitate understanding, their engineers provided a detailed model diagram and specified clear requirements, including the need for a flap rejection mechanism to remove flakes containing metal impurities.